Products

IH type single stage chemical pump

This series of pumps are single-suction, multi-stage, horizontal chemical centrifugal pumps. They are designed according to the international standard ISO2858 and manufactured according to ISO5199/DIS. Used to transport neutral or corrosive media or petroleum products. Flow range 2.5~ 460m/h; head range 2.5~ 132m; medium temperature - -20~ 105 ° C; maximum working pressure 1.6MPa.

Key words:

Category:

IH type stand-alone chemical pump

E-mail:

zibengbengye@163.com

Inquiry

IH type single stage chemical pump

The shaft seal of the pump has a variety of structural forms, the most commonly used is the built-in unbalanced single-end mechanical seal. According to working conditions, external, unbalanced or double-end mechanical seals can also be used. The flushing and cooling method can be internal flushing or external flushing. Sealing attachments (such as cyclone separators, heat exchangers, etc.) can also be installed. For suspended particles or weakly corrosive media, soft packing seals (external flushing or internal flushing) can also be used.

According to the corrosive properties of the medium, different manufacturing materials should be used for the liquid-contacting parts, the most commonly used being 305 (1Cr 18Ni9Ti).

The first two digits in the pump model represent the inlet and outlet diameters of the pump. Such as IH100- -80-160.100 inlet diameter (mm), 80-outlet diameter (mm).

None